Rockwell Automation 1734-IT2I Thermocouple and RTD Input Module User Manual - Manual (Page 22)

Publication 1734-UM004F-EN-E - December 2012
12 Install the Module
3. Insert the module straight down into the mounting base and press to
secure, locking the module into place.
Install the Removable
Terminal Block A removable terminal block comes with your mounting base assembly. To
remove, pull up on the RTB handle to remove the base and replace, as
necessary, without removing any of the wiring. To reinsert the removable
terminal block, proceed as follows.
24VD
C
Source Outpu
t
Module Status
Netw
ork
Status
1734
OB4E
NODE:
0
1
2
3
44012