Rockwell Automation 1734-IT2I Thermocouple and RTD Input Module User Manual - Manual (Page 37)

Publication 1734-UM004F-EN-E - December 2012
Configure Your Module 27
Basic Setup
1. Select the
temperature scale.
2. Then select the type
of thermocouple:
B
C
E
J
K
N
R
S
T or mV
3. Select cold junction
compensation if desired.
4. Select how the cold
junction data is returned in the produced I/O
message. Select None, channel 0, channel
1, or the average of both channels.
5. Download to the device.