Rockwell Automation 1746-NI16V SLC 500 Analog Input Modules User Manual - Manual (Page 116)

Publication 1746-UM001A-US-P
2 Index
D
data word 4-5
addressing 4-5
definition G-2
module input image 5-8
scaling examples 5-12
values for engineering units 5-9
values for scaled data 5-10
data word format 5-6
setting in configuration word 5-6
dB
definition G-2
default filter setting 5-4
default setting of configuration word 5-2
definition of terms G-1
diagnostics
channel 6-2
diagnostics, channel
invalid configuration 6-2
LED indicators 6-3
open-circuit detection 6-3
out-of-range detection 6-2
diagnostics,power-up 6-1
differential mode rejection See normal mode rejection G-3
digital filter
definition G-2
disabling a channel 5-4
door label 1-3
E
electrical noise 3-6 , 3-12
enabling a channel 5-4
engineering units
description 5-10
scaling examples 5-13
equipment required for installation 2-1
error codes 6-5
error conditions 5-20
corrective actions 6-4
errors 6-5
bit definitions 5-20 , 6-5
corrective actions 6-4
descriptions 6-5
detecting channel-related errors 6-5
open circuit 6-3
over-range error 6-2
under-range error 6-2
invalid channel configuration 6-2
module-related errors 6-4
conditions at power-up 6-4
non-recoverable errors 6-4
open-circuit detection 6-3
out-of-range 6-2
over-range error 6-2
status word bit definitions 5-19
European Union Directives 3-6
examples
how to address configuration word 4-5
how to address data word 4-6
how to address status word 4-6
scaling the data word 5-12 – 5-15
F
fault condition
at power-up 1-3
during operation 1-4
faulty calibration 6-5
filter
definition G-2
filter frequency 4-9
definition G-2
selecting for A/D groups 5-5
setting in configuration word 5-4
FSR See full scale range G-2
full scale error
definition G-2
full scale range