Rockwell Automation Logix5000 Controllers Major, Minor, and I/O Faults Programming Manual User Manual
Page 20
Advertising
Chapter 1 Major faults
3. Click OK. The program is added to the Power-Up Handler.
4. Right-click the program you created in step 2 and choose
Add>New Routine.
5. On the New Routine dialog box, in the Name field, type the name of the
routine.
6. In the Assignment field, keep the default setting, Main.
Tip:
Even though you can choose Fault in the Assignment field, assigning the routine as a fault routine
within the Power-Up Handler is not necessary.
20
Rockwell Automation Publication 1756-PM014G-EN-P – October 2014
Advertising