Rockwell Automation 1792D-2BVA2D ArmorBlock MaXum 2 Input with Alarm/2 Output Module Series B - Manual (Page 10)

10 ArmorBlock MaXum 2 Input with Alarm/ 2 Output Module Series B
Publication 1792D-IN015B-EN-P - September 2000
Point indicators for this module are shown below.
The following table describes the network and module status
indicator.
Net/Mod Status Indicator
Indication Status:
Off No power or auto bauding
Flashing Green/Off On line but not connected
Solid Green On line, link OK, connected
Flashing Red Recoverable fault - module configuration error
I/O connection fault - one or more I/O connections in the timed-out
state
Solid Red Unrecoverable fault
Communication failure - duplicate node address present or incorrect
baud rate
Green to Red to Off At powerup only - LED test
I0
A0
I1
A1
O0
O1
Auxiliary Power
Logic Status Net/Mod Status
41454
Point indicators for inputs
I0 and for Alarm A0
Module Status
Indicators
Connector A
Connector B
Connector H
Connector D
Point indicators for inputs
I1 and for Alarm A1
Point indicators for
output O1
Point indicators for
output O0
LED Assignments