Rockwell Automation 1792D-2BVA2D ArmorBlock MaXum 2 Input with Alarm/2 Output Module Series B - Manual (Page 12)

12 ArmorBlock MaXum 2 Input with Alarm/ 2 Output Module Series B
Publication 1792D-IN015B-EN-P - September 2000
Specifications
2 Input with Alarm / 2 Output Module - Cat. No. 1792D-2BVA2D
Input Specification Max. Min.
Inputs per block 2 - 3 wire or dry contact PNP or NPN devices or 2 - 4
wire PNP or NPN devices
Sensor Source Current (per input) 100mA -
Off-Wire Sense Current 0.5mA -
On-state Voltage 25V dc 10V dc
On-state Current 10mA 2mA
Off-state Voltage 5V dc -
Off-state Current - 1.5mA
Output Specification Max. Min.
Outputs per block 2 sourcing outputs labeled 00 and 01
Output Auxiliary Voltage 30V 10V
On-state Voltage Drop 1V -
On-state Current 1A -
Off-state Leakage 1.5mA -
Module Current (all outputs) 2A -
Surge Current - for 10ms,
repeatable every 2s 2.4A -
No Load Sense Current (On-state) 0.18A -
General Specifications
Indicators Net/Mod Status - red/green
Logic Status - red/green
Auxiliary Power - green
Point LED - yellow/orange/red
Communication Rate
•125Kbps @ 500 meters(1600 feet) for thick cable,
flat media length 375 meters
•250Kbps @ 200 meters(600 feet) for thick cable,
flat media length 150 meters
•500Kbps @ 100 meters (330 feet) for thick cable,
flat media length 75 meters
DeviceNet Power Voltage
Current
Refer to the graphs in the
Overview section of the
ArmorBlock I/O Family Technical
Data, pub. no.
1792-TD001B-EN-P. 25V dc max
150mA max (no sensors) 11V dc min up to .8A
(2 sensors @100mA
per sensor)
Auxiliary Power Voltage
Current 30V dc max
2A max 10V dc min
2A max