Rockwell Automation 1792D-16BVTOD ArmorBlock MaXum 16 Input Module Series B - Manual (Page 6)

6 ArmorBlock MaXum 16 Input Module Series B
Publication 1792D-IN016B-EN-P - September 2000
Input connectors for this module are shown below.
IMPORTANT
If the devices (sensors) connected to the input
connections require Class 2 power to operate, the
DeviceNet connections of this equipment must be
powered by a Class 2 source.
ATTENTION
!
•
Make sure all connectors and caps are
securely tightened to properly seal the
connections against leaks and maintain IP67
requirements.
•
For maximum noise immunity, input and
output cable return wires must be properly
terminated. When inputs and outputs are
connected in loopback, return wires should
be connected together.
•
I/O cable length should be less than 30
meters.
30722-M
Input 0
Input 1
Input 2
Input 3
Input 4
Input 5
Input 6
Input 7
Input 15
Input 14
Input 13
Input 12
Input 11
Input 10
Input 9
Input 8
Connector A
Connector B
Connector C
Connector D
Connector H
Connector G
Connector F
Connector E