Rockwell Automation 1792D-16BVTOD ArmorBlock MaXum 16 Input Module Series B - Manual (Page 9)

ArmorBlock MaXum 16 Input Module Series B 9
Publication 1792D-IN016B-EN-P - September 2000
Troubleshoot with the Indicators
This module has the following indicators:
•
Network and Module status indicator
•
Logic status indicator
•
Individual point status indicators for inputs 0, through 15
The following table describes network and module status indicators.
Net/Mod Status Indicator
Indicator Status
Off No power or auto bauding
Flashing Green/Off On line but not connected
Solid Green On line, link OK, connected
Flashing Red Recoverable fault - module configuration error
I/O connection fault - one or more I/O connections in the timed-out
state
Solid Red Unrecoverable fault
Communication failure - duplicate node address present or incorrect
baud rate
Green to Red to Off At powerup only - LED test
30722-M
Point indicators for
inputs 0 and 1
Module Status
Indicators
Connector A
Connector B
Connector C
Connector D
Connector H
Connector G
Connector F
Connector E
Point indicators for
inputs 2 and 3
Point indicators for
inputs 4 and 5
Point indicators for
inputs 6 and 7
Point indicators for
inputs 8 and 9
Point indicators for
inputs 10 and 11
Point indicators for
inputs 12 and 13
Point indicators for
inputs 14 and 15
LED Assignments