Rockwell Automation 1756-BATM ControlLogix Battery Module Installation Instructions - Manual (Page 12)

12 ControlLogix® Battery Module
Publication 1756-IN576B-EN-P - September 2003
Mount the Battery Module
1. To make an electrical connection between the battery module and the
enclosure, scrape the paint off the panel of the enclosure.
2. Install the hardware for the top mounting tabs.
3. Slide the top tabs of the battery module over the screws.
31301-M
M4 or M5 (#10 or #12)
phillips screw, flat washer,
and split lock-washer
31302-M
4. Tighten the screws.