Rockwell Automation 1756-BATM ControlLogix Battery Module Installation Instructions - Manual (Page 17)

ControlLogix® Battery Module 17
Publication 1756-IN576B-EN-P - September 2003
2. Put the battery assembly into the battery module with the wires facing
outward.
3. Connect the battery assembly to the battery module.
4. Replace the door of the battery module.
!
WARNING
When you connect or disconnect the battery an
electrical arc can occur. This could cause an explosion
in hazardous location installations. Be sure that power
is removed or the area is nonhazardous before
proceeding.
For Safety information on the handling of lithium
batteries, including handling and disposal of leaking
batteries, see Guidelines for Handling Lithium
Batteries, publication AG 5-4.
31304-M
no connection