Install the battery assembly – Rockwell Automation 1756-BATM ControlLogix Battery Module Installation Instructions User Manual
Page 16
Advertising
16 ControlLogix® Battery Module
Publication
1756-IN576B-EN-P - September 2003
Install the Battery Assembly
ATTENTION
!
Only install a 1756-BATA battery. If you install a
different battery, you may damage the controller
IMPORTANT
Connect the battery assembly to the battery module
only when you are ready to use it. Even if the battery
module is not connected to the controller, the battery
assembly begins to discharge once you connect it to the
battery module.
31298
1. Remove the door of the
battery module.
Advertising