Rockwell Automation 1769-BOOLEAN Compact I/O BOOLEAN Module Installation Instructions - Manual (Page 14)

14
Publication 1769-IN077A-EN-P - May 2006
Shaded bit positions must be set to 0.
Input filter: Real input point filter selection. See page 15.
EI_Ix: Enable input interrupt; 1 = interrupt enabled, 0 = interrupt disabled.
IT_Ix: Input interrupt type; 1 = generate interrupt on real input point transition from on to off, 0 = generate interrupt on real input
point transition from off to on.
PFE: Program to fault enable; 1 = fault value applied, 0 = program value applied.
PMx: Program mode; 1 = hold last state, 0 = user-defined safe state.
PVx: Program value; 1 = output on, 0 = output off.
FMx: Fault mode; 1 = hold last state, 0 = user-defined safe state.
FVx: Fault value; 1 = output on, 0 = output off.
DB_x: Output Control; 1 = output in Direct Control mode, 0 = output in BOOLEAN Control mode.
EI_Ox: Enable output interrupt; 1 = interrupt enabled, 0 = interrupt disabled.
20 Operator_
2_1
Operator_
1_1
21 Output Delay 1
22 Output Duration 1
23
24 IT_O2 EI_
O2
DB_
1
25 Operand_A_2
26 Operand_B_2
27 Operand_C_2
28 Operator_
2_2
Operator_
1_2
29 Output Delay 2
30 Output Duration 2
31
32 IT_O3 EI_
O3
DB_
3
33 Operand_A_3
34 Operand_B_3
35 Operand_C_3
36 Operator_
2_3
Operator_
1_3
37 Output Delay 3
38 Output Duration 3
39
Wo
rd Bit Position
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0