Rockwell Automation 1792D-16BVT0CD ArmorBlock MaXum 16 Input Module with Complete Diagnostics - Manual (Page 14)

14 ArmorBlock MaXum 16 Input Module with Complete Diagnostics
Publication 1792D-IN053A-EN-P - August 2002
Off-state Voltage - Sourcing 25V dc (SSV -5)V dc
Off-state Current 1.5mA -
Off-Wire Sense Current 0.5mA -
General Specifications
Indicators Net/Mod Status - red/green
Logic Status - green
Point LED - yellow/orange/red
Communication Rate • 125Kbps @ 500 meters(1600 feet) for thick cable, flat
media length 375 meters
• 250Kbps @ 200 meters(600 feet) for thick cable, flat
media length 150 meters
• 500Kbps @ 100 meters (330 feet) for thick cable, flat
media length 75 meters
DeviceNet Power Voltage
Current
25V dc max
60mA max (no sensors) 11V dc min up to 1.6A
900mA(16 sensors
@50mA per sensor)
Dimensions (assembled to base)
inches - (Millimeters) 1.9H x 2.7w x6.85D
(48.26)H x (68.6)W x (174)D
Operational Temperature IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
–25 to 60°C (–13 to 140°F)
Storage Temperature IEC 60068-2-1 (Test Ab, Un-packaged Non-operating Cold),
IEC 60068-2-2 (Test Bb, Un-packaged Non-operating Dry
Heat),
IEC 60068-2-14 (Test Na, Un-packaged Non-operating
Thermal Shock):
–25 to 80°C (–13 to 176°F)
Wiring Category
DeviceNet Conductors
Category
Use 14-22 AWG wire with insulation
Temperature rating of 75°C min.
See Publication DN-6.7.2
2
1, 2
Relative Humidity IEC 60068-2-30 (Test Db, Un-packaged Non-operating Damp
Heat):
5 to 100% non-condensing
Shock IEC60068-2-27 (Test Ea Unpackaged shock):
Operating 30g
Non-operating 50g
Vibration IEC60068-2-6 (Test Fc, Operating):
10g @ 10-500Hz
Emissions CISPR 11:
Group 1, Class A
ESD Immunity IEC 61000-4-2:
6kV contact discharges
8kV air discharges
Enclosure Type Rating Meets IP67
Radiated RF Immunity IEC 61000-4-3:
10V/m with 1kHz sine-wave 80%AM from 30MHz to
2000MHz
10V/m with 200Hz 50% Pulse 100%AM at 900Mhz
16 Input Module - Cat. No. 1792D-16BVTOCD