Rockwell Automation 1792D-16BVT0CD ArmorBlock MaXum 16 Input Module with Complete Diagnostics - Manual (Page 7)

ArmorBlock MaXum 16 Input Module with Complete Diagnostics 7
Publication 1792D-IN053A-EN-P - August 2002
1. Position the module over the mounted cable base. Align the
three captive screws in the module with the accepting
receptacles in the base.
2. Tighten the screws to secure the module to the base.
Note: Dimensions change according to the cable base and
module combination used.
Connect the Input Cord Sets to the MaXum Module
WARNING
!
If you connect or disconnect wiring while the field-side
power is on, an electrical arc can occur. This can cause an
explosion in hazardous location installations. Be sure that
power is removed or the area is nonhazardous before
proceeding.
WARNING
!
Use supply wires suitable for 30°C above surrounding
ambient.
Align the
screws to
properly
assemble the
module to the
base.
Cable Base 1792D-CBFM is
used for this example.
30724-M
Assembled
dimensions in (mm)
1.9 (48.26)
2.7 (68.6)
6.85 (174mm)