Rockwell Automation 1792D-8BV0D ArmorBlock MaXum 8 Input Module with 8 Connectors, Series B I.I. - Manual (Page 14)

14 ArmorBlock MaXum 8 Input Module with 8 Connectors, Series B
Publication 1792D-IN051A-EN-P - February 2001
Specifications
8 Input Module - Cat. No. 1792D-8BVOD
Input Specifications Max. Min.
Inputs per block 8 - 3 wire or dry contact PNP or NPN devices or 8 -
4 wire PNP or NPN devices
Sensor Source Current (per input) 50mA
On-state Voltage 25V dc 10V dc
On-state Current 10mA 2mA
Off-state Voltage 5V dc -
Off-state Current - 1.5mA
Off-Wire Sense Current 0.5mA -
General Specifications
Indicators Net/Mod Status - red/green
Logic Status - red/green
Point LED - yellow/orange/red
Communication Rate
•
125Kbps @ 500 meters(1600 feet) for thick cable,
flat media length 375 meters
• 250Kbps @ 200 meters(600 feet) for thick cable,
flat media length 150 meters
• 500Kbps @ 100 meters (330 feet) for thick cable,
flat media length 75 meters
DeviceNet Power Voltage
Current
Refer to the graphs in the
Overview section of the
ArmorBlock I/O Family Technical
Data, pub. no.
1792-TD001B-EN-P. 25V dc max
200mA max (no sensors) 11V dc min up to
1.6A (8 sensors
@50mA per sensor)
Dimensions (assembled to base)
inches - (Millimeters) 1.9H x 2.7w x6.85D
(48.26)H x (68.6)W x (174)D
Environmental Conditions
Operational Temperature
Storage Temperature
Relative Humidity
Shock Operating
Non-operating
Vibration
-25 to 60 o (-13 to 140 o F)
-25 to 80 o C (-13 to 176 O F)
Up to 100%
30g peak acceleration, 11 (+1) ms pulse width
50g peak acceleration, 11(+1)ms pulse width
Tested 10g @ 10-500Hz per IEC 68-2-6
Conductors Publication 889-CP001A-US-P
Enclosure Meets or exceeds IP67
Agency Certification
(when product is marked) CSA certified
CSA Class I, Division 2, Groups A, B, C, D certified
UL listed
CE marked for all applicable directives
Technical Data (user information) Publication 1792-TD001B-EN-P