Rockwell Automation 1792D-8BV0D ArmorBlock MaXum 8 Input Module with 8 Connectors, Series B I.I. - Manual (Page 9)

ArmorBlock MaXum 8 Input Module with 8 Connectors, Series B 9
Publication 1792D-IN051A-EN-P - February 2001
Troubleshoot with the Indicators
This module has the following indicators:
•
Network and Module status indicator
•
Logic status indicator
•
Individual I/O status indicators for inputs 0 through 7.
The following table describes network and module status indicators.
Net/Mod Status Indicator
Indicator Status
Off No power or auto bauding
Flashing Green/Off On line but not connected
Solid Green On line, link OK, connected
Flashing Red Recoverable fault - module configuration error
I/O connection fault - one or more I/O connections in the timed-out
state
42763
Point indicator for input 0
Module Status
Indicators
Connector A
Connector B
Connector C
Connector D
Connector H
Connector G
Connector F
Connector E
Point indicator for input 1
Point indicator for input 2
Point indicator for input 3 Point indicator for Input 4
Point indicator for Input 5
Point indicator for Input 6
Point indicator for Input 7
LED Assignments
Information on connectors
A through H can be found
in the table on page 8.