Rockwell Automation 7477-IC2VC PlantPAx Server and Workstation Bundles User Manual - Manual (Page 10)

10 Publication 7477-UM001A-EN-E - August 2009
Chapter 2 Process Automation Server (PASS)
Set Up FactoryTalk
Directory Services To set up FactoryTalk Directory services, complete these steps.
1. Choose Start>Programs>Rockwell Software>FactoryTalk
Tools>FactoryTalk Directory Configuration Wizard.
The FactoryTalk Directory Configuration Wizard may take a few
minutes to open.
2. Check the boxes to configure both the network directory and the local
directory and click Next.
It may take 30 seconds to process the request.
3. Enter the FactoryTalk Administration Console credentials (see below)
for the network directory configuration and click Next.
Username: administrator
Password: rockwell
It may take 30 seconds to process the request.
4. Enter the credentials for the local directory configuration and click
Next.
If in a Workgroup environment, enter the Windows credentials. These
are the credentials that were created during the Windows mini-setup.
If in a Domain environment, the credentials must include the computer
name in front of the proper Windows user name.