Rockwell Automation 7477-IC2VC PlantPAx Server and Workstation Bundles User Manual - Manual (Page 23)

Publication 7477-UM001A-EN-E - August 2009 23
Process Automation Server (PASS) Chapter 2
6. Verify that the activations appear in the upper window of the
FactoryTalk Activation tool.
The activation service is now started and the PASS software is ready for
use.
7. Click Exit to close the tool.
Start Your Project Now you are ready to start your project. For example:
• Configure new users and roles.
• Add the PASS to a domain.
• Setup FactoryTalk Directory security.
• Load and develop the application files.
For information on implementing a process system, see the PlantPAx Process
Automation System Reference Manual, publication
PROCES-RM001 .