Start the factorytalk activation server – Rockwell Automation 7477-IC2VC PlantPAx Server and Workstation Bundles User Manual User Manual
Page 21
Advertising

Publication 7477-UM001A-EN-E - August 2009
21
Process Automation Server (PASS) Chapter 2
13. Copy the LIC file to this directory location on the PASS:
C:\Program Files\Common Files\Rockwell\Activations
The activations are now downloaded and you can start the Activation
Server (
see page 21
).
Start the FactoryTalk Activation Server
To start the FactoryTalk Activation server, complete these steps.
1. Insert the dongle into an open USB port on the PASS.
2. Open the FactoryTalk Activation Tool and click the Settings tab.
3. Click Start.
Advertising
This manual is related to the following products: