Rockwell Automation 7477-IC2VC PlantPAx Server and Workstation Bundles User Manual - Manual (Page 31)

Publication 7477-UM001A-EN-E - August 2009 31
Operator Workstation (OWS) Chapter 3
Configure an OWS to Use Activations from an Activation Server
To configure the OWS to use activations from an activation server, complete
these steps.
1. Choose Start>Programs>Rockwell Software>FactoryTalk Activation>
FactoryTalk Activation Tool on the OWS.
2. Click the Settings tab.
3. Add the FactoryTalk Activation server computer to the 'Folders and
servers searched by applications' box.
Syntax = PortNumber@ServerName
For example, 27000@servername where 27000 is the default port for
FactoryTalk Activation server.
4. Check 'Browse for Activations on start-up'.
5. Click the Current Activation tab and click Refresh.