Rockwell Automation 7477-IC2VC PlantPAx Server and Workstation Bundles User Manual - Manual (Page 16)

16 Publication 7477-UM001A-EN-E - August 2009
Chapter 2 Process Automation Server (PASS)
Activate Software on a PASS with Internet Connectivity
To activate software on a PASS with Internet connectivity, complete these
steps.
1. Insert the dongle included with the PASS into any available USB port.
2. Choose Start>Programs>Rockwell Software>FactoryTalk Activation>
FactoryTalk Activation Tool.
3. Click the Get Activations tab.
Do not click 'Use Host ID of a dongle' at this time. You will configure
this later.
4. Click Open Activation Wizard.