Rockwell Automation 2706-DXX Dataliner Message Display DL5 Series - Manual (Page 34)

2706-UM001A-US-P
3-10 Entering New Messages
5. Press the [Y] and [Retrn] keys in response to the USE LINE 1? option.
The DL5 will display:
6. Press the [N] and [Retrn] keys in response to the SCROLL MODE?
prompt. This will select the message to be displayed in the line mode.
The DL5 will display:
7. You want each block of the message to be displayed for three seconds.
Press the [3] and [Retrn] keys to select a wait time of 3. The DL5 will
display:
8. You want the message to be cleared from the display after the selected
wait time has elapsed so press the [Y] and [Retrn] keys. The DL5 will
display:
9. The message that is being entered will only be displayed once per
trigger, so press the [N] and [Retrn] keys. The DL5 will display:
10. You want the message to flash, so press the [Y] and [Retrn] keys to
select the flashing message option. The DL5 will display a flashing
cursor which indicates that a new message can be entered.
11. Enter the message <HOLDING TANK #1>. The message will appear
on the display:
12. Press the [Ctrl] and [J] keys to move the cursor to the next block of the
message. The DL5 will display the cursor at the first character position
in the second block of the message.
SCROLL MODE?
WAIT TIME:
AUTO CLEAR?
AUTO REPEAT?
FLASH MESG?
HOLDING TANK#1*
*