Rockwell Automation 6157 Industrial 20 inch Monitors - Manual (Page 20)

20 Industrial 20" CRT Monitor
Publication 6157-5.1
Cleaning
Occasionally clean the display panel and cabinet with a soft cloth
dampened (not soaked) with a mild (non-abrasive) glass cleaner. Keep
turning a fresh side of the cloth toward the screen surface to avoid
scratching it with accumulated grit.
Note: The solvent should be applied only to the cloth, and not
directly on the monitor screen.
Do not use paper products as they may scratch the surface.
To minimize the risk of abrasion, allow the screen to
stand dry.
Special care should be taken when cleaning a resistive touchscreen or
polycarbonate shield that is installed over the screen. Abrasive and
certain chemical cleaners can easily damage the surface. Never use
alcoholic or ammoniac cleaners.
Routine Maintenance