Rockwell Automation 6157 Industrial 20 inch Monitors - Manual (Page 28)

28 Industrial 20" CRT Monitor
Publication 6157-5.1
$ $SSHQGL[ % SSHQGL[ % 9 9LGHR & LGHR &DDEOHV EOHV
You can use two types of video cable connectors to connect the 6157
Industrial Monitor to the host computer:
•
HD-15 connectors
•
BNC connectors.
The HD-15 video cable you use with this monitor is equipped with a
conventional HD-15 connector at each end.
Note: The following figure is the view looking into the pin end of
the male connector or solder term end of the female
connector.
Figure 8
HD-15 Video Connector
The following table provides the pin numbers and corresponding pin
assignments for the HD-15 video connector with the DDC2B capability:
HD-15 Connectors