Rockwell Automation 6157 Industrial 20 inch Monitors - Manual (Page 3)

Industrial 20" CRT Monitor 3
Publication 6157-5.1
,QGXVWULDO ,QGXVWULDO  &57 0RQLW  &57 0RQLWRRUU
The Bulletin 6157 20" Industrial CRT Monitor is a general purpose
monitor suitable for a wide range of industrial computing applications. It
offers the following features:
•
Versatile multi-sync interface (640 x 480 to 1280 x 1024 resolution)
•
High-contrast INVAR mask tube
•
Reliable and rugged industrial design
•
Durable NEMA 4/4X/12 front panel
•
Fully-integrated digital design
•
Microprocessor communications port for remote control of all
monitor functions.
ATTENTION: The equipment described in this
document generates, uses, and emits radio frequency
energy. The equipment has been tested and found to
comply with FCC Rules, Part 15, subpart J, for Class A
computing devices.
The use of non-shielded interface or power cords with
Allen-Bradley industrial monitors is prohibited.
ATTENTION: X-ray emissions from these monitors are
typically about 0.05 mR/hr maximum, well below the 0.5
mR/hr maximum recommended by the US. Department of
Health and Human Resources and specified in "Federal
Performance Standards for Television Receivers", Section
10, Part 1020, Title 21, of the U. S. Code of Regulation
(PL90-620), Vol. 38, No. 198.
These monitors are equipped with X-ray protection
circuits which cause automatic shutdown of the
equipment in case its X-ray emissions begin to approach
Federal limits.
Description