Rockwell Automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP Adapter Modules - Manual (Page 32)

Publication 1794-UM066A-EN-P - February 2012
24 Rack Optimized Discrete I/O
To work along with this example set up your system as shown above.
•
Note that in the example application, the Logix5572 controller and
1756-EN2TR module are assumed to be in the slots shown above.
•
Verify the IP addresses for your programming terminal, 1756-EN2TR
module, and 1794-AENTR adapter.
•
Verify the position (slot) of the I/O modules on the DIN rail.
•
Verify that all wiring and cabling is properly connected.
•
Make sure your communication driver (for example, AB_ETH-1 or
AB-ETHIP-1) is configured in RSLinx as described in
Appendix C .
Create the Example
Application Perform the following steps to create the example application:
Local
chassis
FLEX I/O
Logix5572c
ontroller 1794-OB16
digital output
1794-IB16
digital input
1756-EN2TR
130.130.130.2
1794-AENTR
130.130.130.3
Data
Programming
terminal
130.130.130.1
SLOT 1 2
SLOT 1 2