Add the digital output module – Rockwell Automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP Adapter Modules User Manual
Page 39
Advertising
Publication 1794-UM066A-EN-P - February 2012
Rack Optimized Discrete I/O 31
3. Enter the following parameters:
4. Click OK to save the configuration.
The digital input module appears in the I/O configuration indented under
the 1794-AENTR adapter.
Add the Digital Output Module
1. Under the I/O Configuration folder, right-click the remote
1794-AENTR adapter, and then select New Module.
Name
FLEX_Digital_Input
Slot
0
Comm Format
Rack Optimization
Electronic Keying
Compatible Module
Advertising