Rockwell Automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP Adapter Modules - Manual (Page 78)

Publication 1794-UM066A-EN-P - February 2012
70 Adapter Web Dialogs
The Identity page opens.
From the Identity page, complete entries for the following, noting that the
description and location help you identify where modules are in the facility:
• Host Name
• Module Description
• Module Location
6. Click Apply Changes to save the modified values.
Use the Network Configuration Page
To use the Network Configuration page to make entries for enabling or disabling
DHCP and setting TCP/IP parameters and Ethernet link operation, click
Network Configuration tab at the top of the page or panel on the left.