Rockwell Automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP Adapter Modules - Manual (Page 57)

Publication 1794-UM066A-EN-P - February 2012
Analog I/O with Direct Connection 49
4. Monitor channel 0 of the 1794-IF4I input module
(FLEX_IO_Adapter:2.I.Ch0Data above).
The value slowly rises to approximately 32000, resets to zero, starts rising
again, and so on, as the output of the timer is received from the
1794-OF4I output module.
This completes the Direct Connect Analog I/O example.
Chapter Summary This chapter described how to set up and use analog I/O modules with direct
connection.
TIP For information on wiring and troubleshooting the I/O modules,
refer to the FLEX I/O Analog I/O Module Installation Instructions,
publications
1794-IN037 and 1794-IN038 .