Performing a calibration – Rockwell Automation 6159 Industrial 17 inch CRT Monitors, Series B User Manual
Page 32
32
Industrial 17" CRT Monitor
Publication 6159-5.1
Once you have obtained this information, install the software using the
installation disks found in the touchscreen accessory package.
Note:
Before installation, you may want to check the touchscreen
manufacturer’s site on the World Wide Web for the latest
software drivers. Enter the following address in your
Internet browser to access the manufacturer’s web site:
Look for one of the following product names on the web
site:
•
TouchTek5 resistive touchscreen
•
ClearTek capacitive touchscreen
After installing the driver software, follow the instructions in the
touchscreen documentation.
Following installation of the touchscreen software and calibration, the
touchscreen is ready to use.
Performing a Calibration