Rockwell Automation 6159 Industrial 17 inch CRT Monitors, Series B - Manual (Page 34)

34 Industrial 17" CRT Monitor
Publication 6159-5.1
Specifications
Display
CRT Type 17” diagonal flat square, 0.27mm dot pitch
RGB short persistence (Hi-EU Red)/Dark TINT,
Tension-band implosion protected
Degaussing Manual and automatic
Nominal Display Area
(4:3 aspect) Horizontal
(4:3 aspect) Vertical
Diagonal
11.8in. (300mm +/- 3mm)
8.9in. (225mm +/- 3mm)
14.8in. (375.9mm)
Non Linearity (CHP Method)
Horizontal
Vertical
7% max
6% max
Regulation 2mm max peak deviation
Misconvergence 0.3mm max inside centered circle 225mm dia.,
0.4 max outside
Luminance (typical) 35 fL +/- 5% fL, small white square
CIE coordinates
White x:=0.283, y:=0.298 (9300K +8MPCD)
Video
Resolution 640 x 480 to 1280 x 1024 (monitor will sync to 1280 x
1024, though tube dot pitch 1024 x 768
Supported Standards IBM VGA (640x480 at 60Hz )
VESA (640x480 at 60/72Hz, 800x600 at 56/60/72Hz,
1024x768 at 60/70Hz)
DEC (1024x864 at 60Hz, 1280x1024 at 66/72Hz)
Horizontal Scan Rate Variable: 30kHz to 70kHz
Vertical Scan Rate Variable: 50Hz to 180Hz
Retrace Times
Horizontal
Vertical
2.7 usec max
0.475 msec max
Video Bandwidth 86MHz
Video Input Signal RGB analog (white level = 0.714V above ref. black,
into 75 Ohms, single ended)
Sync Input Signals Separate Horizontal and Vertical Sync Control, TTL
signal levels
Sync on green (0.286V below ref. black) or
Composite separate (into 75 Ohms, single ended)
Input Connection HD-15
Controls and Indicators Front Panel: operation keys access on-screen
display (H Size, H Pos, V Size, V Pos, Contrast,
Brightness, Manual Degauss, Raster Rotation, etc.)
Operator Input Touchscreen Option: Resistive or capacitive
touchscreen, with serial controller and driver software