Rockwell Automation 6159 Industrial 17 inch CRT Monitors, Series B - Manual (Page 33)

Industrial 17" CRT Monitor 33
Publication 6159-5.1
$ $SSHQGL[ % SSHQGL[ % 9 9LGHR & LGHR &DDEOHV EOHV
You use an HD-15 video cable equipped with a conventional HD-15
connector at each end to connect the 6159 Industrial Monitor to the host
computer.
Note: The following figure is the view looking into the pin end of
the male connector or solder term end of the female
connector.
Figure 9
HD-15 Video Connector
The following table provides the pin numbers and corresponding pin
assignments for the HD-15 video connector with the DDC2B capability:
Table F
Standard HD-15 Video Cable
Monitor HD-15
(Female)
Signal Description Host
HD-15 (Male)
1 Red Video 1
2 Green Video 2
3 Blue Video 3
4 Ground 4
5 Ground 5
6 Red Video Ground 6
7 Green Video Ground 7
8 Blue Video Ground 8
9 Not Used 9
10 Sync Ground 10
11 Ground 11
12 Bi-Directional Data (SDA) 12
13 Horizontal Sync 13
14 Vertical Sync (VCLK) 14
15 Data Clock (SCL) 15