Transfer data in memory – Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C-Frame) - ForGe Control User Manual
Page 109
Rockwell Automation Publication 7000L-UM301D-EN-P - June 2014
109
Operator Interface
Chapter 3
A screen typical of
will be displayed. To modify the text refer to the
section entitled
, noting the following exception. When the
text has been entered (as in
) the enter key has no effect. Press the exit
key [F10] to accept the edited string.
Prior to exiting the screen, the string can be returned to its state upon entry to the
screen by pressing the [F7] key.
Figure 92 - Edit the Drive Name
Figure 93 - Editing Complete
Transfer Data in Memory
The operator interface contains long term storage in two forms. Flash memory
contained in the operator interface is used to store the firmware and optionally
language modules and parameters used in the drive. This information can also be
stored on a removable flash card that can be taken to another drive.
In order to transfer information from the two forms of memory, press the [F7]
key. This displays a new screen (
) from which all flash memory
operations are performed. Refer to the section entitled
for instructions on these features.