Pcmcia memory card installation data, Description, Installing the memory card – Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C-Frame) - ForGe Control User Manual
Page 167: Description installing the memory card
Rockwell Automation Publication 7000L-UM301D-EN-P - June 2014
167
Operator Interface
Chapter 3
PCMCIA Memory Card
Installation Data
Description
The memory card slides into the card slot located on the backside of the
PowerFlex 7000 drive operator interface. These instructions show how to insert
the card in the Operator interface.
Installing the Memory Card
1.
Locate the vertical card slot on the back of the operator interface. See
Figure 177 - Rear View of Operator Interface
2.
Position the card vertically so the key slot is facing the right side of the
operator interface.
WARNING: The memory card should be kept free from moisture, extreme
temperatures, and direct sunlight. Failure to observe this caution could result in
damage to the card.
WARNING: Do not subject memory card to flexing or extreme shock. Failure to
observe this caution could result in damage to the card.
COMMUNICATION CABLE
CARD SLOT