Rockwell Automation 2090-xxx Fiber Optic Cable Installation and Handling Instructions - Manual

Publication 2090-IN010C-EN-P – April 2005
Fiber Optic Cable Installation and Handling
Instructions
Introduction
Fiber optic cables can be easily damaged if they are improperly handled or
installed. It is imperative that certain procedures be followed in the handling
of these cables to avoid damage and/or limiting their usefulness. The
information contained in this manual should serve as a guide to proper
handling, installing, testing, and for troubleshooting problems with fiber
optic cables.
For: See page:
Overview 2
Fiber Optic Cable Pulling Techniques 3
Routing Fiber Optic Cables 5
Installation Checklist 6
Cleaning Techniques for Fiber Optic Cables 7
Fiber Optic Cable Attenuation Measurements 8
Plastic Fiber Optic Cable Attenuation Limits 12
SERCOS Attenuation Limits 15
System Field Testing Overview 16
Configuring Light Source 18
Physical Test Mode for Connections 19
Fiber Optic Cable Specifications 25
Rockwell Automation Support BackCover