Rockwell Automation 6181 Installation Instructions - Manual (Page 2)

Installation Instructions
Publication 6181-IN002C-MU-P
6181 Industrial Computer 6181 Industrial Computer 6181 Industrial Computer 6181 Industrial Computer
Chapter Objective
This chapter describes installation of the 6181 Industrial Computer
including how to install the 6181 Computer in a panel using mounting
studs or clips.
European Union Compliance
The 6181 Computer meets the European Union Directive requirements
when installed within the European Union or EEA regions and has the CE
mark. A copy of the Declaration of Conformity is available at the
Rockwell Automation/Allen-Bradley Internet site: www.ab.com
ATTENTION: The 6181 Computer is intended to
operate in an industrial or control room environment,
which utilizes some form of power isolation from the
public low voltage mains. Some configurations may not
comply with the EN 61000-3-2 Harmonic Emissions
standard as specified by the EMC Directive of the
European Union. Obtain permission from the local power
authority before connecting any configuration that draws
more than 75 watts of AC power directly from the public
mains.