Rockwell Automation 6181 Installation Instructions - Manual (Page 4)

4 6181 Industrial Computer
Publication 6181-IN002C-MU-P
Mounting Hardware
The 6181 Computer is shipped with the following mounting hardware:
Table A
Mounting Hardware
Item Description Quantity Use For
Self-locking nuts
(#10-32) 10
(8 required) Panel or enclosure
mounting
Mounting clips 6 Panel or enclosure
mounting
Tools Required
In addition to the tools required to make the cutout, you will need the
following tools:
For Mounting Studs:
3/8 inch socket
6 inch (15 cm) extension rod (minimum)
Socket driver (in/lb. torque wrench recommended)
Ruler
For Mounting Clips:
Flat blade screwdriver
Ruler