Rockwell Automation 6181 Installation Instructions - Manual (Page 21)

6181 Industrial Computer 21
Publication 6181-IN002C-MU-P
AC Power Connections
A standard IEC 320 power cord provides power to the 6181 Computer AC
version. The power supply input will accept 120/240 V AC. The power
supply is autoswitching.
ATTENTION: The power cord must be connected to an
outlet having an earth ground (three-prong outlet). Failure
to follow this warning could result in severe electrical
shock.
Use the power cord retainer to prevent accidental interruption of power to
the 6181 Computer. Pull the cord retainer over the cord plug as shown
below.
ATTENTION: EXPLOSION HAZARD! You must
install the power cord retainer clip to ensure safety in
hazardous locations.
Failure to secure the power cord with the retainer clip
could result in hazardous conditions if the power cord is
accidentally disconnected.