Rockwell Automation 4100-IF2 IF2 I/O Interface to PDM Installation Instructions - Manual (Page 2)

2 IF2 I/O Interface to PDM
Publication 4100-IN001A-EN-P- February 2001
Important User Information
Those responsible for the application and use of this product must
satisfy themselves that all necessary steps have been taken to assure
that the application and use of this product meets all performance
and safety requirements, including all applicable laws, regulation
codes, and standards.
The illustrations, charts, sample programs, and layout examples
shown in this manual are intended solely for purposes of example.
Since there are many variables and requirements associated with
any particular installation, Allen-Bradley does not assume
responsibility or liability (to include intellectual property liability) for
actual use based upon the examples shown in this publication.
Allen-Bradley publication SGI-1.1, Safety Guidelines for the
Application, Installation, and Maintenance of Solid State Control
(available from your local Allen-Bradley office), describes some
important differences between solid state equipment and
electromechanical devices that should be taken into consideration
when applying products such as those described in this publication.
Throughout this documentation we use notes to make you aware of
safety considerations:
Warning statements help to:
• Identify a hazard.
• Avoid a hazard.
• Recognize the consequences.
WARNING
!
Identifies information about practices or
circumstances that can lead to personal injury or
death, property damage, or economic loss.
IMPORTANT
Identifies information that is critical for successful
application and understanding of the product.