Rockwell Automation 4100-IF2 IF2 I/O Interface to PDM Installation Instructions - Manual (Page 4)

4 IF2 I/O Interface to PDM
Publication 4100-IN001A-EN-P- February 2001
Compliance to the European Union Directive
This product doesn’t bear the CE mark because it has been defined
as a component. It has been tested as part of a system and is
included in the declaration of conformance for the system It has
been designed and tested to meet the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards:
•
EN 50081-2EMC - Generic Emission Standard, Part 2 -
Industrial Environment
•
EN 50082-2EMC - Generic Immunity Standard, Part 2 -
Industrial Environment
This product is intended for use in an industrial environment.
Heavy Industrial Environment
The IF2 I/O Interface to PDM is intended for use in a heavy
industrial environment and is not to be used in a domestic or office
environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low
Voltage, by applying the safety requirements of EN 60204 Safety of
machinery - Electrical equipment of machines.