Installation, Mounting – Rockwell Automation 4100-IF2 IF2 I/O Interface to PDM Installation Instructions User Manual
Page 7
Advertising
IF2 I/O Interface to PDM 7
Publication 4100-IN001A-EN-P- February 2001
Installation
The interface is a DIN rail mounting unit which has a terminal strip
(1.5 mm
2
screw clamp type) down each side.
Mounting
The Interface board has 2 mounting feet on the back to attach it to
the DIN rail.
Figure 2 DIN Rail Mounting Feet
Mounting Feet
Mounting Feet
Advertising