Rockwell Automation 2755 Atomscan Bar Code Scanner - Manual (Page 8)

Chapter 2
AtomScan Product Family
2–2
The scanners use a low power visible laser diode. As with any bright light
source, such as the sun, you should avoid staring directly into the beam.
Momentary exposure to a CDRH Class II laser is not known to be harmful.
!
ATTENTION: The laser beam can be harmful to eyesight.
Avoid direct eye contact with the laser beam when the mirror is
not spinning
Avoid prolonged eye contact with the laser beam when the mirror
is spinning.
!
ATTENTION: Never point the beam at other people, or in a
direction where people may be passing.
Figure 2.2
Safety Label on Top of AtomScan scanners
AVOID EXPOSURE
LASER LIGHT IS EMITTED
FROM THIS APERTURE
LASER LIGHT DO NOT STARE INTO
BEAM
670 nm LASER DIODE
1.0 MILLIWATT MAX
CLASS II LASER PRODUCT
CAUTION
LASERSTRAHLUNG, NICHT IN DEN LICHTSTRAHL
BLICKEN, SICHTBARE LASERSTRAHLUNG.
LASERKLASSE 2
VORSICHT
CAUTION - LASER LIGHT WHEN OPEN - DO NOT STARE INTO BEAM
PRODUCT CONFORMS TO USA DHHS 21CFR SUBCHAPTER “J”
LABEL NO. 11-110002-01
Safety Labels