Rockwell Automation 2711-T5AxxL1_T6CxxL1 PanelView 550/600 Touch Screen Terminals - Manual (Page 4)

4 PanelView 550/600 Touch Screen Terminals
Publication 2711-IN034 F-EN-P - February 2009
European Union Directive Compliance
If a PanelView 550/600 touch screen terminal is installed within the European
Union or EFTA regions and has a CE mark, the following regulations apply.
This apparatus is tested to meet directive:
•
EMC Directive 89/336/EEC Electromagnetic Compatibility (EMC) and
amending directives 92/31/EEC, 93/68/EEC
Using the following standards, in whole or in part:
•
EN 50081-2:1993 EMC - Generic Emission Standard, Part 2 - Industrial
Environment
•
EN 61000-6-2:1999 EMC - Generic Immunity Standard, Part 2 - Industrial
Environment
•
EN 61131-2:1995 EMC - Programmable Controllers - Equipment
Requirements and Tests
The product described is intended for use in an industrial environment.
Intended Use of Product
According to these Standards, the factor which determines, for EMC purposes,
whether an apparatus is deemed to be “Industrial” or “Residential, commercial and
light industrial”, is given in Clause 1 of EN50081-2 as follows:
Apparatus covered by this standard is not intended for connection to a
public mains network but is intended to be connected to a power network
supplied from a high- or medium-voltage transformer dedicated for the
supply of an installation feeding a manufacturing or similar plant.
The PanelView 550/600 touch screen terminal is intended for use solely in an
industrial environment as defined above. When installed in Europe, any other
application is in contravention of European Union Directives, and a breach of these
laws.