Rockwell Automation T743x-xx ICS Regent+Plus RTD Input Equipment - Manual

ICS Regent+Plus
®
PD-7037
Industrial Control Services 1
RTD Input Equipment
Input Module, Mux, Termination Panel and Cable
(T7432-IM, T7432-Mux, T7432-TP and T7432-CA)
Issue 1, March, 06
The RTD input equipment includes a RTD input module
(T7432-IM), a RTD input multiplexer (T7432-MUX), a RTD
termination panel (T7432-TP), and a RTD termination cable
(T7432-CA). This equipment provides terminations and
temperature conversion for as many as 16 RTD inputs,
arranged in 2 groups of eight inputs.
Features
· Sixteen inputs for 100W platinum RTDs.
· Configuration options:
RTD type: American (" = 0.00392 S/S/°C)
European (" = 0.00385 S/S/°C)
Input Leads: 2, 3 or 4-wire
Units: Degrees F or degrees C
Resolution: Units or tenths
Noise Filter: 50 Hz, 60Hz rejection
· Complete linearization and automatic calibration.
· Remote terminations up to 50 cable feet from I/O chassis.
· Individual front panel indicators on each module show active,
fault and MUX fault status.
· 2500 volt isolation between Input Module and Mux.
· Hot-replaceable input module and Mux.
· Extensive fault diagnostics.
· TÜV certified for safety, Risk Class 5.
The input module plugs into an I/O chassis slot and receives
data from the RTD input multiplexer (or Mux). The RTD
input multiplexer plugs into the termination panel and
provides low level signal conditioning, multiplexing, and