Trusted, Communication interface t8151b – Rockwell Automation T8xxx Trusted Communications Interface User Manual

Page 50

Advertising
background image

Trusted

TM

Communication Interface T8151B

Issue 21 Apr 10

PD-T8151B

50

From

To

Communication
Interface (PL5)

Interface
Adapter (J3)

9 Way D-type

25 Way D-type

DIN41612
Socket

9 way Phoenix
Contact Socket

To DTE
(Socket)

To DCE
(Plug)

To DTE
(Socket)

To DCE
(Plug)

A5 (TXD1)

1 (TXD)

2 (RXD)

3 (TXD)

3 (RXD)

2 (TXD)

C6 (RXD1)

2 (RXD)

3 (TXD)

2 (RXD)

2 (TXD)

3 (RXD)

A6 (RTS1)*

3 (RTS)*

8 (CTS)

7 (RTS)

5 (CTS)

4 (RTS)

A7 (CTS1)*

4 (CTS)*

7 (RTS)

8 (CTS)

4 (RTS)

5 (CTS)

C9 (GND1)

5 (GND)

5 (GND)

5 (GND)

7 (GND)

7 (GND)

B7 (DSR1)*

6 (DSR)*

4 (DTR)

6 (DSR)

20 (DTR)

6 (DSR)

C7 (DCD1)*

7 (DCD)*

4 (DTR)

1 (DCD)

20 (DTR)

8 (DCD)

B6 (DTR1)*

8 (DTR)*

6(DSR)

4 (DTR)

6 (DSR)

20 (DTR)

B6 (DTR1)*

8 (DTR)*

1(DCD)

-

8 (DCD)

-

C8 (RI1)*

9 (RI)*

Not
Connected

9 (RI)

Not
Connected

22 (RI)

Note:

GND refers to Signal Ground. This should not be connected to chassis ground e.g. Pin 1 on 25 Way D-types.

* Signals shown for completeness only, not used in the Communication Interface.

Table 19 Cable wiring for CI Port 1

Table 20 below shows some alternatives for the wiring for Port 2 when using a cable.

From

To

Communications
Interface (PL5)

Interface
Adapter (J7)

9 Way D-type

25 Way D-type

DIN41612
Socket

5 way Phoenix
Contact Socket

To DTE
(Socket)

To DCE
(Plug)

To DTE
(Socket)

To DCE
(Plug)

A11 (TXD2)

1 (TXD)

2 (RXD)

3 (TXD)

3 (RXD)

2 (TXD)

C11 (RXD2)

2 (RXD)

3 (TXD)

2 (RXD)

2 (TXD)

3 (RXD)

B11 (RTS2)*

3 (RTS)*

8 (CTS)

7 (RTS)

5 (CTS)

4 (RTS)

C12 (CTS2)*

4 (CTS)*

7 (RTS)

8 (CTS)

4 (RTS)

5 (CTS)

C13 (GND2)

5 (GND)

5 (GND)

5 (GND)

7 (GND)

7 (GND)

Note:

GND refers to Signal Ground. This should not be connected to chassis ground e.g. Pin 1 on 25 Way D-types.

* Signals shown for completeness only, not used in the Communications Interface.

Table 20 Cable wiring for CI Port 2

Figure 19 below shows the connection of the Communication Interface front panel port. This also
applies to the processor front panel port. These are normally connected using a TC-304-01
maintenance cable.

Advertising