Rockwell Automation MDF-SBxxxx Kinetix 6000M Integrated Drive Motor Installation Instructions - Manual (Page 13)

Kinetix 6000M Integrated Drive-Motor 13
Rockwell Automation Publication MDF-IN001B-EN-P - August 2013
Load Force Ratings
An IDM unit can operate with a sustained shaft load. The figure shows radial and axial load
force locations, and the tables provide maximum values for each force.
Load Forces on the Shaft
The tables represent 20,000 hour L
10
bearing fatigue life at various loads and speeds. The 20,000
hour life does not account for possible application-specific life reduction that can occur due to
bearing grease contamination from external sources.
Loads are measured in pounds; kilograms are mathematical conversions.
Radial Load Force Ratings
Axial Load Force Ratings with Maximum Radial Load
Axial Load Force Ratings with Zero Radial Load
Cat. No.
500 rpm
kg (lb) 1000 rpm
kg (lb) 2000 rpm
kg (lb) 3000 rpm
kg (lb) 3500 rpm
kg (lb) 5000 rpm
kg (lb)
MDF-SB1003 – 74 (163) 59 (129) – 49 (107) 43 (95)
MDF-SB1153 106 (233) 84 (185) 67 (147) – 55 (121) –
MDF-SB1304 140 (309) 111(245) 89 (195) 77 (170) – –
Cat. No.
500 rpm
kg (lb) 1000 rpm
kg (lb) 2000 rpm
kg (lb) 3000 rpm
kg (lb) 3500 rpm
kg (lb) 5000 rpm
kg (lb)
MDF-SB1003 – 27 (59) 20 (44) – 16 (35) 13 (29)
MDF-SB1153 52 (114) 39 (86) 29 (64) – 22 (48) –
MDF-SB1304 49 (107) 36 (80) 27 (59) 22 (49) – –
Cat. No.
500 rpm
kg (lb) 1000 rpm
kg (lb) 2000 rpm
kg (lb) 3000 rpm
kg (lb) 3500 rpm
kg (lb) 5000 rpm
kg (lb)
MDF-SB1003 – 36 (80) 27 (59) – 21 (47) 18 (40)
MDF-SB1153 69 (152) 51(112) 38 (87) – 30 (66) –
MDF-SB1304 69 (152) 51 (112) 38 (83) 31 (69) – –
Axial Load Force
Radial Load Force is applied at center of shaft extension.