Rockwell Automation T7832 ICS Regent+Plus Historian Packages for Winterpret - Manual (Page 23)

Historian Package for W INTERPRET (T7832)
P D - 7 0 4 2 M a r c h , 0 6
23
added to W INTERPRET to perform the necessary retrieval of
historian data from the Regent controller.
These features allow you to monitor sequence of events and
process historian function blocks while they execute in the
Regent. From the monitor windows you can perform the
following activities:
1) Monitor the Control Parameters for the function block
2) Open a Log file into which you can save collected
historical data.
3) Collect any historical data from the historical buffers of
the function blocks in the Regent and save the data to the
opened log file on the PC.
4) Set an Echo to Device option to echo any collected
historical data retrieved from the Regent to a PC device such
as the Comm ports (COMM1 through 4) or printer ports
(LPT1, 2 or 3).
5) Print the Log files that were created by monitoring and
collecting the historian data from the Regent.
All of the on-line retrieval of historical data are performed by
opening a project, opening the Execution Controller window,
opening the program monitor and opening the historian
function block monitor. Fore more details about these steps
using W
INTERPRET , refer to Section 7, Loading Monitoring
and Testing Application Programs in the Regent User’s
Guide.
Using the Sequence of Events Monitor
When you have selected a Sequence of Events function block
in the Program Monitor window and choose the Monitor
command from the Control Menu, the Sequence of Events
Monitor window is opened as shown in Figure 13.