Rockwell Automation T7832 ICS Regent+Plus Historian Packages for Winterpret - Manual (Page 7)

Historian Package for W INTERPRET (T7832)
P D - 7 0 4 2 M a r c h , 0 6
7
An event variable must be defined as an I/O point, a shared
control relay or system control relay. If you enter the name of
a local control relay for an event entry, you will get an error
when you compile the function block.
After you have used the Add Entry and Insert Entry
commands, your event entries will be listed in the Sequence of
Events Editor Window like those shown in Figure 3.
Figure 3. Example of Event Entries in the Sequence of
Events Editor Window.
Edit Entry
Use the Edit Entry command to edit and modify the
configuration for a specific event entry.
Delete Entry
Use the Delete Entry command to delete an event entry from
the list. Select the entry you wish to delete and choose Delete
Entry from the Edit menu.
Control Parameters
Use the Control Parameters command to define the execution
parameters for the sequence of events function block. The
control parameters you define apply to all of the event entries,
not individual entries.
When you select the Control Parameters command from the
Edit menu the following dialog box is opened: