Rockwell Automation T7832 ICS Regent+Plus Historian Packages for Winterpret - Manual (Page 27)

Historian Package for W INTERPRET (T7832)
P D - 7 0 4 2 M a r c h , 0 6
27
Close Log File
This command will close the opened log file and save it to disk.
You must have a log file open to use this command. After
closing the log file you must use the Open Log File Command
before you can again retrieve SOE data from the Regent.
Clear Log File
This command will clear the contents of the log file that is
currently open, removing any previously recorded and saved
SOE data from the log file on the PC. You must have a log file
open before you can use this command.
This command does not clear the historical buffer of the
function block in the Regent. The historical buffer in the
Regent is only cleared when the Clear Contact for the
function block is on.
Print Log File
Use this command to print the entire contents of the currently
opened log file. You must have a Log File open to use this
command.
View Function Block Source
Use this command to open a dialog to display the list of event
entries configured for the sequence of events function block.
Figure 15. Sequence of Events: View Source.
In the dialog you can scroll through the list to see the names
and descriptions of the variables defined as event entries.
Important!