Rockwell Automation T7832 ICS Regent+Plus Historian Packages for Winterpret - Manual (Page 28)

Historian Package for W INTERPRET (T7832)
2 8
Industrial Control Services
When you are through viewing the list of entries, choose OK
to close the View Source dialog box.
Control Menu
The Control Menu provides certain command that are
common to all function block monitors. These include Run,
Stop and Scan commands to control the execution status of
the entire application program. For descriptions of these
commands see Commands Common to all Function Block
Monitors in Section 7, Loading Monitoring and Testing
Application Programs in the Regent User’s Guide.
Additionally the Control Menu provides the following
commands that are used specifically for monitoring and
retrieving SOE data from the Regent.
Monitor Contacts
This command displays a dialog box which displays the status
of the control parameters for the SOE function block. The
status of the Start Contact, Clear Contact, Count Variable
and Size are shown.
Figure 16. Sequence of Events: Monitoring Contacts
Dialog.
Monitor and Collect
This command is used to perform the collection of the SOE
historical buffer from the Regent. When you choose this
command the Monitoring Contacts dialog is opened and
W
INTERPRET is communicating to the Regent, retrieving the
contents of the SOE historical buffer. As events are retrieved,
they are scrolled through the monitor window.